![]() To test out the spacing, find a 4-inch diameter sphere (such as a bocce ball) and ensure it can’t pass between the balusters. If a deck baluster must be placed against a lower railing, the 4-inch rule also applies to the space between the bottom of the railing and the deck surface. Code requirements dictate that balusters be spaced less than 4 inches apart to prevent babies and small children from sticking their heads in the gaps between balusters. Deck railing balusters should be spaced less than 4 inches apart.īalusters are the vertical posts that run along the guardrails and stair railings to prevent people and pets from falling off the edge of the deck or staircase. The IRC specifies that deck stair railing should measure between 34 and 38 inches high, so homeowners may wish to use railing that is even higher than 34 inches for their deck stairs. Whether you need railings for your deck, porch, or. Deck stair railing should stand at least 34 inches high, measuring vertically from the nose of the stair tread to the top of the rail. Visit the SMITH POINT FENCE showroom for quality deck and stair rails. When purchasing railing for a deck, homeowners will need to consider both guardrails around the perimeter of the deck and railing for the deck stairs. Photo: Deck stair railing should measure at least 34 inches high. If a proposed deck will be lower than 30 inches above grade, it may not require guardrails to pass code (but a homeowner may opt to install them for safety anyway). ![]() Some local municipalities have their own code requirements about guardrail height, so check with the building department to ensure it does not require a higher railing than 36 inches. The deck guardrail height should be a minimum of 36 inches, as measured from the surface of the deck to the top of the rail. According to the IRC, deck guardrails must be installed on any deck higher than 30 inches above grade. For straight railing, make sure that guardrails are at least 36 inches high.īuilding codes for a standard single-family residential dwelling are typically based on the International Residential Code (IRC), a set of minimum guidelines established to ensure the protection of public health, safety, and welfare. However, there are a few standard guidelines about railings to follow when planning a deck building project. Since codes can vary by location, it’s always a best practice to contact the local building department and inquire about any necessary permits, inspections, and specific building plan requirements before starting construction. ![]() A low-platform deck may not need a railing to meet code requirements, while higher-platform decks may call for a deck railing with specific height and spacing requirements. ![]() These codes set forth the requirements for any deck railing based on the platform height and the overall dimensions of the deck to ensure the safety of anyone using it. As with most residential projects, the required deck railing height will depend on the municipality’s building codes. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |